The NX1 series brings Q-Code (High-level programming) to 32-bit MCU, which provides customers with an easy-to-use, highly productive development environment to cope with the importance of in-time product concept realization. The multi-purpose NX_Programmer (USB-2-Serial adaptor) provides customers with various functionalities: program code debugging @ ICE, prototype demo @ FDB (Flash Demo Board) and mass production @ OTP. Moreover, NYIDE also supports C-Code environment, which provides customers with more controllability over complicated projects.
Wide Operating Voltage: 2.4V ~ 5.5V
32-bit CPU core
Dual Clock Operation. Built-in oscillators for HI_CLK (32 MHz) and LO_CLK (32,768 Hz), each trimmed to +/-0.5% accuracy.
Power management to support 4 operating modes: Normal / Slow / Standby / Halt mode. At Halt mode, the consumption current is less than 1uA.
LVD (Low Voltage Detection): Total 6-level options: 3.6V, 3.4V, 3.2V, 2.6V, 2.4V, 2.2V
Timers (Timer0 / Timer1 / Timer2): Each Timer consists of divider and 16-bit down-counter with various clock sources
Two PWM Generators (PWMA / PWMB)
ADC (Analog Digital Conversion)
Built-in MIC bias, 2-stage of pre-amplifiers and AGC/PGA for gain control
Built-in 14-bit DAC + 1.3-Watt Push-Pull power amplifier
Two SPI masters supported
IR TX, UART, I2C, SDHC supported
RTC with 4KHz / 1KHz / 64Hz / 2Hz interrupts
WDT (Watch-Dog Timer) supported with optional 188ms / 750ms Reset
Support OTP Security Lock to prevent OTP data from being read
Easy-to-use Development Environment
S/W-based Speech/MIDI Codec
Noise filter @ 4x up-sampling
For the detailed descriptions, please refer 新疆25选7开奖池多少.
Nyquest Technology Co., Ltd. Address: 7F-1, No.81, Shuili Road, Hsinchu City 30059, Taiwan, R.O.C. Tel: +886-3-516 9077 Fax: +886-3-516 9076
?2010 Copyright Nyquest Technology Co., Ltd., All Rights Reserved. Best Viewed at 1280 x 1024 Microsoft Internet Explorer 8 Last updated: 2019/06/01